Lifegard Aquatics R440808 Use and Care Manual download pdf

Servicing my Quiet One 5000-6000 series pump

1. Completely disconnect the pump from your system and the power outlet.

2. Remove the gray front housing by gently squeezing the sides and pulling straight out

until it comes off.

3. Twist the gray volute counter-clockwise until it slips out of the grooves, then pull it

straight out.

4. Remove the impeller/ceramic shaft assembly from inside the pump and examine it for

signs of damage. Inspect the inside of the impeller chamber to make sure there isn’t any

warping or grinding. Severe damage to the inside of the impeller chamber can be caused

by a lack of maintenance or an instance of dry-running, and can void the warranty. Apply

silicone lubricant to both ends of the ceramic shaft, to ensure optimal performance and

smooth running.

5000-6000 Pond version Impeller 5000-6000 Aquarium/Fountain version Impeller

1 2

Page 1

Servicing my Quiet One 5000-6000 series pump 1. Completely disconnect the pump from your system and the power outlet. 2. Remove the gray front housi

Page 2

5. Insert the impeller/ceramic shaft assembly back into the impeller chamber. 6. Return the volute to its original position by fitting it into the

Lifegard Aquatics R440808 Use and Care Manual